EM Test Transient Generators

The EM TEST transient generators are the ideal starting point to set up an EMC test facility. Most versatile to meet many requirements but also most ecomomic in terms of cost they are designed for fully compliant conducted immunity testing. The following "all-in-one" solutions are available to meet your test requirements. The EMC Shop stocks an assortment of the EM Test transient generators and with online ordering it makes everything fast and easy.

EM Test Transient Generators

  • Surge: Generators for combination/wave test IEC 61000-4-5ANSI C63 and more.
  • EFT/Burst: Electrical Fast Transient Generators for IEC 61000-4-4.
  • Dips, Drops (& Variations): PQF/Powerline Tests in accordance to IEC 61000-4-114-29 and more.
  • Automotive: Assortment of transient surges found in DC powered vehicles..
  • Ring Wave: Oscillatory wave tests per IEC 61000-4-12, 4-18, ANSI and more.
  • Telecom: Additional tests on data lines in unison with surge simulation tests.
  • Flicker & Harmonics: Power sources and analyzer turn key systems per IEC 61000-3-2 and 3-3.
  • ESD: Electrostatic discharge immunity simulators per IEC 61000-4-2
  • Magnetic: Radiated magnetic susceptibility per IEC 61000-4-8 and IEC 61000-4-9

Software for EM Test

Control Software for EM Test Transient Generators

IEC.Control allows for remote operation, custom test sequences, an expansive test standards library and reporting.

EM Test Transient Generators Videos

EM Test Transient Generators There are 44 products.


  • EM Test Multifunctional Generators

    The EM TEST modular multifunctional test generators are the ideal starting point to set up an EMC test facility. Most versatile to meet many requirements but also most ecomomic in terms of cost they are designed for fully compliant conducted immunity testing. The EMC Shop stocks a variety of configurations to help you meet your testing needs, now.

  • EM Test Surge Combination Wave Generators

    Surge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. This leads to currents or electromagnetic fields causing high voltage or current transients. Another source for surge pulses are switching transients originating from switching disturbances and systems faults. Due to the characteristic of the phenomenon nearly every electrical and electronical device may suffer from such lightning events which justifies the necessity of surge tests being widely performed. Surge voltage can reach several thousands of volts and surge current is seen to reach several thousands of amps.

    EM TEST offers a wide range of Combination Wave Surge generators with different output voltage ranges for various test requirements:

  • EM Test Electrical Fast Transient Burst Generators

    EM TEST offers high-end EFT/burst generators with maximum pulse amplitude and spike frequency capabilities, best user convenience and built-in coupling/decoupling networks, strictly conforming with the latest requirements of EN/IEC 61000-4-4.
    Apart from standalone EFT/burst generators multi-functional generators with additional testing capabilities (e.g. Surge, PowerFail and Ringwave) are available as compact solutions.

  • EM Test Telecom Surge Generators

    Telecom networks and connected telecom systems and devices are subject to lightning strokes and other disturbances and therefore require an effective and carefully selected protection. The EM TEST Telecom Surge generators are specifically designed to meet the various requirements laid out by ITU, FCC and Telcordia/Bellcore:

  • EM Test Power Quality Testers

    Voltage dips, short interruptions and variations of voltage and frequency in supply systems can considerably affect electrical and electronic systems. EM TEST supplies fully compliant power quality test solutions for to simulate the various supply voltage anomalies.

  • EM Test Voltage Surge Generators

    EM TEST supplies a variety of Voltage Surge generators for safety testing and isolation withstand capability testing. Specifically designed solutions are available for testing audio, video and other ITE products, for testing photovoltaic panels and for protection relays etc.:

  • EM Test Current Surge Testers

    Testing with current surge pulses is common for testing components such as surge protection devices. For this purpose current pulses with various waveforms and amplitudes from several tenth of amps up to several thousand amps are required. EM TEST offers solutions to fit these requirements.

per page
Showing 37 - 44 of 44 items
    • New units Ship Immediately
    • Rent the Compact NX5 B-1-300-16 for $975/month
    • Compact NX5 B-1-300-16 Configuration Includes:
      • 5.5 kV EFT/Burst Immunity Capability per IEC 61000-4-4 edition 3
      • Monitoring Outputs (BNC)
      • Pre-programmed test routines
      • Built in Single Phase Coupler 300 Volts 16 Amps
      • AC Adapter for EUT Inputer (Standard 3 Prong)
      • Banana Plugs for CDN Input
      • Calibration Certificate
      • Manual
    Request Quote/More Info
    • 9kHz to 1GHz Signal Generator 
    • Amplitude modulation: 1Hz to 3kHz (0% to 95%)
    • Pulse modulation: 1Hz - 1kHz (10% to 90%)
    • Built-in amplifier, 100kHz to 300MHz 
    • Built-in current monitor, 9kHz to 1GHz  
    Request Quote/More Info
  • Quick view
    $14,400.00 $48,000.00 -70%
    • Standalone tester for 10 / 700us pulse according to IEC 61000-4-5
    • Test voltage up to 10kV
    • Compliant with ITU-T standard for enhanced test level
    • Complies with FCC part 68 (Surge B pulses)
    • Integrated CDNs for 2-wire and 4-wire applications
    • Manual operation
    • Standard test procedures
    • RS232 and GPIB interfaces
    $14,400.00 $48,000.00 -70%
    Reduced price!
    Request Quote/More Info
    • Fully IEC 61000-4-5 compliant
    • 1.2/50us - 8/20us; IEC coupling
    • Surge pulses 500 Volts to 10,000 Volts
    • Single phase CNV 501S4 1PH/16A coupler included standard (Inquire for 3 Phase)
    Request Quote/More Info
    • Perform IEC 61000-4-11 Tests:
      • Voltage dips
      • Voltage interruptions
      • Voltage variations
      • Inverse
    Request Quote/More Info
    • Impedances values as per IEC/EN 61000-3-3IEC/EN 61000-3-11
    • Non-saturable air coil inductors
    • Line voltage 3 x 400V
    • Line current up to 32A per phase
    • Automatic overcurrent protection
    • Status indication by LED
    • Remote-controlled by EM Test DPA 503N
    Request Quote/More Info
  • Request Quote/More Info
    • Model: Compact NX5 bsp-1-300-16 for Burst, Surge, Power Fail
    • Built-in single phase CDN 300 V, 16 A
    • Smallest compact generator with 7" touch screen
    • Surge Immunity per IEC 61000-4-5
    • EFT/Burst Immunity per IEC 61000-4-4
    • Powerfail Immunity per IEC 61000-4-11
    • Monitoring Outputs (BNC)
    • Rent EM Test Compact NX5 BSP-1-300-16  
    Request Quote/More Info
Showing 37 - 44 of 44 items