Impedance Stabilization Network (ISN)

(Showing 11 of 11)

Rent, buy or lease CISPR 22 Impedance Stabilization Networks (ISN). The EMC Shop stocks calibrated test equipment for ITE compliance to radio disturbances.

  • Teseq

    SKU: sku-1080

    Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

    Weight: 550 grams (1800 grams with storage case)
    Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines
    Common Mode Impedance: 150 Ω ±20 Ω
    Current Rating: 600 mA (line), 1200 mA (pair)
    Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB
    Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)
    Frequency Range: 150 kHz to 30 MHz
    Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.
    RF Connector: BNC 50 Ω
    RF Input Voltage: 15 V max
    Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4
    Voltage Division Factor: 10 dB ±1 dB
    Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds
  • Teseq

    SKU: sku-861

    Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

    Weight: 1.2 lbs. (0.55 kg)
    Connectors: 105 x 65 x 110 mm
    Current Rating: 600 mA (per line), 1.2 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: Cat 3 - 150 kHz to 30 MHz: 39.3 to 55 dB Cat 5 - 150 kHz to 2 MHz: 65 dB Cat 5 - 2 MHz to 30 MHz:: 49.3 dB to 65 dB
    Mains & EUT Connections: RJ11 and RJ45
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2, CISPR 22/32
    Voltage Rating: 63 VAC 100 VDC
  • Com-Power

    SKU: sku-395

    Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz

    Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]
    Current Rating: 800 mA (per line), 1.6 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB
    Mains & EUT Connections: D-sub 25 pin female connectors
    RF Connector: 50Ω N-type (female)
    Standards Met: ISPR 16-1-2, CISPR 22/32
    Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
    $4,295.00
  • Com-Power

    SKU: sku-581

    Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

    Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]
    Current Rating: 800 mA (per line), 1.6 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB
    Mains & EUT Connections: D-sub 25 pin female connectors
    RF Connector: 50Ω N-type (female)
    Standards Met: ISPR 16-1-2, CISPR 22/32
    Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
    $410.00
  • Teseq

    SKU: sku-161

    Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

    Weight: 550 grams (1800 grams with storage case)
    Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines
    Common Mode Impedance: 150 Ω ±20 Ω
    Current Rating: 600 mA (line), 1200 mA (pair)
    Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB
    Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)
    Frequency Range: 150 kHz to 30 MHz
    Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.
    RF Connector: BNC 50 Ω
    RF Input Voltage: 15 V max
    Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4
    Voltage Division Factor: 10 dB ±1 dB
    Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds
  • Com-Power

    SKU: sku-394

    Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz

    Weight: 2 lbs (0.91 kg)
    Current Rating: 800 mA (per line), 1.6 Amps (per pair)
    Dimensions: 10.8” x 4.5” x 3.8” (275 mm x 115 mm x 96 mm)
    Frequency Range: 150 kHz to 30 MHz
    Isolation: 150 kHz to 1.5 MHz: 35 dB to 55 dB (increasing linearly with the log of freq.) 1.5 MHz to 30 MHz: 55 dB
    Mains & EUT Connections: D-sub 25 pin female connectors
    RF Connector: 50Ω N-type (female)
    Standards Met: EN 55022 (CISPR 22), CISPR 16-1-2
    Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.