Keysight (Agilent)

Quick Links


Keysight (Agilent)

The EMC Shop stocks a variety of used Keysight (Agilent) test equipment. Keysight Technologies, formerly Hewlett Packard and Agilent, have released several high quality test instruments for EMI and EMC testing. Primary categories include EMC spectrum analyzers, preamplifiers, and transient limiters.

Keysight (Agilent) There are 18 products.


  • Keysight (Agilent) EMI Analyzers

    Rent, buy or lease Keysight (Agilent) EMI Analyzers. The EMC Shop specializes in radiated and conducted emissions testing for MIL 461, CISPR, DO-160 and more.

  • Keysight (Agilent) RF Power Meters

    Rent, buy or lease Keysight (Agilent) RF Power Meters. The EMC Shop stocks equipment for signal integrity testing and component characterization. Keysight (Agilent) RF power meters operate with sensors of various types (CW, average and peak and average), covering numerous frequency and power ranges to accurately measure the power of RF and microwave signals. Applications include testing the output power of communication base-station transmitters, cellular telephones, radar system equipment, and much more.

  • Keysight (Agilent) RF Power Sensors

    Rent, buy or lease Keysight (Agilent) RF Power Sensors. The EMC Shop stocks equipment for signal integrity testing and component characterization.

  • Keysight (Agilent) RF Signal Generators

    Rent, buy or lease Keysight (Agilent) RF Signal Generators. The EMC Shop stocks equipment for signal integrity testing and component characterization.

  • Keysight (Agilent) EMC Accessories

    Transient limiters, near field probes and other accessories for EMC and FCC emissions testing.

  • Keysight (Agilent) RF Accessories

    Rent, buy or lease Keysight (Agilent) RF Accessories. The EMC Shop stocks equipment for signal integrity testing and component characterization.

  • Keysight RF Signal Analyzers

    The EMC Shop has built a large inventory of Keysight RF spectrum/signal analyzers for use of radiated emissions testing and compliance. Rentals are now available for signal sniffing, communications, R&D and general purpose radio frequency testing.

per page
Showing 1 - 12 of 18 items
    • Protects the spectrum analyzer input from damage caused by high-level transients
    • Frequency Range: 9 kHz to 200 MHz
    • Insertion Loss: 10 dB
    • Maximum Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V
    Request Quote/More Info
    • True dual-channel power meter - two simultaneous power readings
    • Fast measurement speed (up to 100 readings per second, over the GPIB, with E-series sensors)
    • Speed improvement of x2 using the 8480 series power sensor (compared to the 437B)
    • No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-series sensors
    • Code compatibility with 438A power meter
    • GPIB and RS232 connector for remote control of all functions
    • Internal rechargeable battery option provides up to 4 hours continuous use (option 001)

    To Rent Agilent E4419B

    Request Quote/More Info
  • Request Quote/More Info
    • Low frequency coverage (9 kHz to 6 GHz) for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3)
    • High sensitivity (-60 to +20 dBm) and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers
    • Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies
    • Special option available to 18 GHz
    • Precision type-N connector as standard
    • Operates with the EPM-P (E4416A/ 17A) series and P-Series (N1911A/ 12A) power meters
    Request Quote/More Info
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote/More Info
    • EEPROM to store cal factors eliminates manual entry
    • Wide frequency range from 50 MHz to 50 GHz
    • Wide dynamic range from -35 dBm to +20 dBm
    • Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability
    • Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
    • SCPI codes compatible with 8480 series (option CFT)
    Request Quote/More Info
    • Rentals Ship Same Day
    • Include NIST Calibration and Interconnect Cable
    • Measure the average power of all modulation formats
    • Wide dynamic range (-60 dBm to +20 dBm) and frequency range 10 MHz to 18 GHz
    • High maximum power specification
    • Low SWR for reducing mismatch uncertainty
    • Calibration factors, linearity and temperature compensation data stored in EEPROM
    • Fast measurement speeds (up to 400 readings per second with the E4416A)
    • Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
    Request Quote/More Info
    • 9kHz - 3.0GHz Frequency Range
    • Provides reliable RF signal generation at an affordable price
    • Easily perform general purpose testing with a full sweep function
    • Expand your test with extensive analog and optional IQ modulation
    • Simpler front panel and remote operation with an intuitive GUI in 11 languages and standard USB connectivity
    • Confidently verify the design of today’s consumer electronic products
    • Obtain reliable results in installation and maintenance, service and repair
    • Provide essential RF education training


    • Quick Start Guide
    • USB cable
    • Country-specific power cord
    • Documentation set (CD-ROM)
    • 3-year return-to-Keysight warranty
    Request Quote/More Info
    • User-friendly interface provides quick set up, switching, and remote control of smallscale automated test equipment (ATE)
    • Controls up to 20 SPDT switches1 concurrently, or a combination of 4 programmable attenuators and 4 SPDT switches
    • Multiple connectivity options: GPIB, USB or LAN for easy remote integration
    • An integrated, tri-voltage power supply saves rack space (11713C only)
    • External VDC port connects any type of switch and provides forward compatibility for switches
    • Full backward compatibility with the Keysight Technologies 11713A
    • Built-in counter monitors the life cycle of attenuators and switches
    Request Quote/More Info
    • Full-vector network and spectrum measurement and analysis
    • Wide dynamic range network measurement with fast sweep speeds
    • +/-0.05 dB /+/-0.3deg dynamic magnitude/phase accuracy
    • Extremely fast narrowband spectrum measurement
    • Impedance analysis option and test kit available
    • -145 dBm/Hz sensitivity for spectrum analysis
    • Built-in IBASIC for easy test automation
    • Time-gated spectrum analysis option
    • Color TFT display and built-in disk drive/RAM disk
    Request Quote/More Info
    • Calibrated, Ships Same Day
    • 520- Frequency Range: 9 KHz to 20 GHz
    • 1E1- Step attenuator, 115 dB
    • 1EA- High output power
    • UNW - AM FM Phase modulation/Narrow pulse modulation
    • Ideal for MIL-STD-461 RS103 Testing
    Request Quote/More Info
    • Frequency range: 30 MHz to 3 GHz
    • Measurement tool for EMI precompliance test, troubleshooting and design verification
    • Searches for sources of interference early in the design process
    Request Quote/More Info
Showing 1 - 12 of 18 items