Com-Power PAM-103 1 MHz - 1000 MHz Preamplifier for EMI/EMC Measurements

Com-Power PAM-103 1 MHz - 1000 MHz Preamplifier for EMI/EMC Measurements

Weight:
3.3 lbs. (1.5 kg)
Application/Test Type:
Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector:
50Ω N-Type (f)
Dimensions:
7.5 x 5 x 3 inches
Frequency Range:
1 MHz - 1000 MHz
Gain:
33 dB typical (± 3 dB flatness)
Input:
12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
Maximum Continuous Power:
+4 dBm @ 1 dB compression
VSWR:
1.3:1
Manufacturer:
Com-Power
Online Orders Ship Same Day

 

The Com-Power PAM-103 Preamplifier for EMI/EMC Measurements is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 to 1000 MHz.. It has gain of 33 dB gain . Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured. The PAM-103 has a gain variation of ±3 dB for the entire frequency range to reduce measurement errors. It can be powered by the rechargeable NimH batteries included when an external power source is not available.

Com-Power PAM-103 Features:

  • Frequency Range of 18 GHz to 40 GHz
  • Low Noise Figure: 3.7 dB
  • High Gain: 37 dB typical
  • Low VSWR: 2.9:1 Typical
  • Output Power: +4 dBm @ 1 dB compression
  • Flatness: ± 3 dB
  • Individually Calibrated (gain calibration included)

Equipment Specifications

Manufacturer:
Com-Power
Weight:
3.3 lbs. (1.5 kg)
Application/Test Type:
Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector:
50Ω N-Type (f)
Dimensions:
7.5 x 5 x 3 inches
Frequency Range:
1 MHz - 1000 MHz
Gain:
33 dB typical (± 3 dB flatness)
Input:
12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
Maximum Continuous Power:
+4 dBm @ 1 dB compression
VSWR:
1.3:1

Related EMC Equipment & Solutions

Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain
Quick view

Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

SKU: sku-368

Weight: 1 lb. (0.45 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Dimensions: 83 x 42 x 25 mm (3.27 " x 1.65" x 0.985")
Flatness: ± 2 dB
Frequency Range: 10 MHz - 1000 MHz
Gain: 21 dB
Input: Max Input: 2 VDC, +10 dBm
Maximum Continuous Power: 6 VDC, 0.5 A
View Product Cart
Com-Power PAM-118A High Gain EMC Broadband Preamplifier, 500 MHz - 18 GHz, 40 dB Gain
Quick view

Com-Power PAM-118A High Gain EMC Broadband Preamplifier, 500 MHz - 18 GHz, 40 dB Gain

SKU: sku-217

Weight: 2.5 lbs (1.1 3Kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
Connector: 50Ω Precision N-type (female)
Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)
Frequency Range: 500 MHz - 18 GHz
Gain: 40 dB typical (± 2.5 dB flatness)
Input: 15 VDC, 500 mA
Maximum Continuous Power: +102dBm @ 1 dB compression
RF Input Voltage: 0 Vdc (max)
VSWR: 2.2:1 maximum
View Product View Product
Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz
Quick view

Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

SKU: sku-367

Weight: 3.3 lbs. (1.5 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Battery: Battery Pack: Two 6 V, 0.7 A NimH
Connector: BNC (f)
Dimensions: 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)
Flatness: (+/-) 2 dB
Frequency Range: 100 Hz - 30 MHz
Gain: 28 dB
Impedance: 50 Ohms
Input: Max. DC Input 10 VDC, 2 dBm Input Power 12 VDC, 500 mA
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form